How to Frame Flies in a Shadow Box

Articles, featured, Fly Tying Tips — By on January 29, 2017 9:17 am

How to Frame Flies in a Shadow Box

BIG thanks to Gary at http://theriverscourse.blogspot.com for permission to share

When Mike Valla gave back to me the sixty-odd hairwings I tied for his latest book, Tying and Fishing Bucktails and Other Hairwings – Atlantic Salmon Flies to Steelhead Flies, I knew I wanted to donate them to the Miramichi Salmon Association’s Boston fundraising dinner auction. But how to present them? To store the flies, I put some sheet Styrofoam down in a cigar box. For awhile, I thought that would be good enough to send to the auction. But then I thought, “How about in a nice Wheatley box?” The problem with that would be how one would keep the names straight (if one wanted to keep the group of flies together as a collection)? What to do?

Final framing 033

As luck would have it, I was straightening up a few things in the basement (don’t know what I was thinking there…Sisyphus had a better chance of rolling that boulder all the way to the top of the hill than I do of straightening out our basement!) I happened upon some old precut mat boards that Bridget had from years ago. They were 11″X14″ with a 7.5″X9.5″ cutout. Hmmmm. Took one to the shop, grabbed the flies, and started playing around with them. Looked like 25 hairwings would fit nicely in that opening, and 10 streamers fit well, too. That little light bulb in my head that usually glows so dimly started to brighten…here was the solution to my presentation problem!

Now, my hands shake too much to be able to print or write the way I used to, but I can use the Word program on my computer a little, so I started laying out a background from the alphabetical list of the flies:

mock up 003

Yup, that was going to work (notice that the flies are facing in a different direction than the final product. Don’t know why, but every one that does this sort of thing seems to orient the fly so that the head is on the right. Maybe because, at least for right-handed tyers, that’s usually the best side of the fly?

better mockup 001

I decided I’d use the method where one uses wire from the back side of the backing, through a bead, around the fly and back through the backing. Found a couple youtube videos about how to do it. As an old museum director, I just couldn’t make myself use the very non-reversible method involving glue, which effectively destroys the fly (to my mind). BUT that means having to punch a very straight set of holes through the backing mat.

Enter my drafting set from my 1968 Freshman Drafting class in my Automotive Technology college curriculum. Forty nine years young and still in service! First step: lay the paper on the drafting board and make sure it’s parallel with the T-square:

SBS 001

SBS 007

I laid a row of hooks about the names on the left-most column, and with a sharp pencil marked where the eye and apex of the bend of the hook lay.

SBS 002

SBS 003

Measured the typical hook (almost all Gamakatsu T10-6H’s):

SBS 008

Drew centerline’s through each column of names, then went 5/8’s” inch on each side of center line, and using the triangle, started a grid system (this is all on a plain sheet of copy paper).

SBS 010

Now, between using the T-square and the triangle, starting with just those first couple dots, I have a complete grid system that allows me to punch holes for the wire in exactly the same relation to each name as any other name.

SBS 011

Then I taped the plain paper with layout on it over the nice cardstock I want to use for the actual background, and using my trusty dissecting needle (AKA (nowadays) dubbing needle) I start punching holes through both sheets. Oh, did I mention that said needle came from Freshman Biology class when I started College all over again in 1978 in Natural Resources Conservation? Obviously, you should never through a good tool away.

SBS 014

The nice ivory-colored card stock all punched up and ready for flies:

SBS 016

I used a spray adhesive to glue the cardstock to the acid-free mat board backing:

SBS 017

Really, the hardest part is over…no more thinking, just doing. Well, except for when we have to make the shadow box frames, of course. All we need are flies, glass beads (thank you, Wal-mart), and silver wire (size small is pictured. After one fly, I switched to medium. If you ever try this, you’ll see why I switched to medium).

SBS 018

Pretty easy, really. Pass the wire through the bead, through the eye of the fly, back through the bead, pass both ends through the matting, and tape off. After two or three, it really goes quickly:

SBS 019

SBS 020

SBS 023

SBS 022

SBS 032

But wait, there’s more! We need to make the thick “between mat” (I’m sure there’s a word for that part that real framers use). So I went to the local art supply store – surprisingly, there actually is one in Bennington, Vermont – and found 1/4″ acid free foamcore board.

foam core work 001

Lay out and cut two 11″X14″ pieces…

foam core work 002

Lay the cutout mat we’ve been using over the foamcore and trace the opening:

foam core work 003

Now we take our handy-dandy six inch by 1/2 inch steel ruler that we’ve also been lugging around for a thousand years and use it to enlarge the opening by 1/2 inch:

foam core work 004

Now we take our big steel rule and razor knife to cut out two identical pieces of foamcore:

foam core work 005

Note: I did all of these steps 4 times, since I’m making four framings. Well, three for my flies and one for someone else’s (hopefully). Anyway, 1/4″ doesn’t get it for thickness; we need 1/2″, so out comes the trusty spray glue and we have what we need, thickness-wise:

Final framing 002

If you peer into a shadow box like this, you’d be able to see the foamcore. Can’t have that, so we slice up some seafoam green mat board (to match the main outside mat) and cover the foamcore:

Final framing 004

Final framing 005

The foamcore that I cut out makes a good form to keep the strips in place while the glue drys. Have to trim it slightly to account for the thickness of the strips; a wedge or two helps where needed:

Final framing 006

Nice and neat finish to this part of the ordeal project:

Final framing 009

The time has come to put all this work away in a safe place…sawdust time. I had looked into store-bought shadow box frames…but none of them looked right to me…and I couldn’t afford them anyway.
I did have an 8′ length of 5/4″X6″ pine left over from some project or other; looked like it would be perfect, and give me enough wood to make four frames after I cut the knots out. Must have clear wood for these frames! I ripped the piece into 1 3/8″ strips. That width would allow me to run the strips through the joiner to remove saw marks and straighten them, and then to sand them to get to the 1 1/4″ width I desired.

Strips cut:

Final framing 010

Through the joiner:

Final framing 012

Enough for the four frames after cutting out the knots:

Final framing 013

Ganging up a set for almost final sanding. This ensures that they all stay the same dimension.

Final framing 014

It’s important to “ease” the edges. Sharp edges don’t take paint or stain well, and they get bonked and look bad pretty easily.

Final framing 016

First cut in making a piece of frame. Initally, I was going to do this in one pass through the router, but after I got that all set up and realized how close my fingers would be coming to a sharp object spinning at 15,000 rpm’s, I opted for the more time consuming table saw method.

Final framing 017

Second cut gives the final actual profile of the frame.

Final framing 018

Ready for the miter saw!

Final framing 019

I screw a board down at the correct length to ensure each piece is cut to exactly the same length. If you try and measure and cut each piece individually, you A. spend way too much time, and B. are probably going to have bad miter joints because the pieces aren’t exactly the same length. I have to set this up twice, since the frames are rectangular.

Final framing 022

Four sets ready for glue-up:

Final framing 023

Gluing mitered corners can be a pain if you don’t have a good clamping system. I bought one such clamp years ago, and could never make it work. For whatever reason, the day I was doing this I had an “I will not be defeated” attitude about the thing, and finally figured it out. Happy me! With good glue and a good fixture, there is no need for nails at the joints. I was using the little square to ensure that the frame really was square in the clamp

Final framing 024

Pretty nice miter joints if I do say so myself. Which I do!

Final framing 027

Now we have four frames ready for staining and clear finishing:

Final framing 026

On to staining. If you’re using Minwax products, its important to use their Pre-stain stuff when staining softwoods. Through the miracle of chemistry, it prevents the stain from blotching on that kind of wood. I’m using Minwax’s English Chestnut stain; used it on other projects, and everyone seems to like it.

Final framing 028

How do you stain an object like this, he asked himself while staring at it for what seemed like hours. Seeing all the cut-off pieces from the project, that dim bulb once again blazed to brightness: a fixture, made from scrapes, that would hold the back of the frame (which I stain first, then let dry) off the table and allow me to get the tops and sides without holding on to it:

Final framing 029

Final framing 030

Final framing 031

Put a box under the fixture, and it’s ready to be sprayed with the final satin clear coat:

finished framings 001

Add glass, set in the mat set, place a final matboard backing, secure with push points, and Voila!, the framings are finished.

finished framings 010

finished framings 009

finished framings 007

That was quite a project; I’m pleased with the end results. There are certainly many ways to make a shadow box framing. This is probably the redneck way! Now I just hope that at least two other folks are, too….takes two to make an auction, doncha know.

Cheers,
Gary
BIG thanks to Gary at http://theriverscourse.blogspot.com for permission to share

VN:F [1.9.13_1145]
Rating: 0 (from 0 votes)

2 Comments

  1. Daniel says:

    Excellent work on the shadow box. I have made these before as well, and I have not used the wire and bead process to secure the fly, I opted for a short wood dowel that I would glue to the rear printed piece (mark the location to glue the dowel with a dot on the printed page). Then I simply stuck the point of the fly into the dowel. The problem I have with this is that you rely on the strength and durability of the glue over time, and it has a tendency to fail now and then, and need to be taken apart and re-glued. I like your wire and bead solution. My only concern would be with larger dry flies that the offset from the backing sheet would not be large enough, and the hackle would be squished. They do have longer tubular style beads that may work for larger offsets.

    VA:F [1.9.13_1145]
    Rating: 0 (from 0 votes)
  2. Gary says:

    Beautiful and ingenious displays from the ground up. The woodworking and cut mats add to the artistry of the flies and fonts. For those of us less talented, shadow boxes are available at craft stores. I have found cork that has been machine cut for use on musical instruments to be a good support for flies. It allows dry flies a little space to prevent hackles from being crushed. I recently printed new mats for a couple of fly displays that I put together 40yrs ago and transferred the corks and flies to the new displays.

    VA:F [1.9.13_1145]
    Rating: 0 (from 0 votes)

Leave a Comment

Overall
Durability
Reliability
Value
Usability


Powered by WP Hashcash

Tags:

Related Articles

WordPress SEO