Hatches Magazine Fly Patterns

daiich 2220
bead .025 lead
marabou
grey angle hair

bead the hook
10 wraps of lead
tie in tail
make a dubbin loop
place 1.5 inch long angle hair on petitjean tool and pull it down in to the table with a half of a marabou feather. grab it with the second clip and trim off the stem. place it in the loop and spin.
wrap the hook n whip

Daiichi 2220 size 8
Cone
.25 lead wire as you wish (I used 10 wraps)
marabou tail
stiff fiber hackle
Ice dub
Zonker strip

Place cone on hook, wrap lead wire, tie lead wire in tight to back side of cone, cote in head cement, tie in the tail the same length as the hook shank, Tie in the hackle by the tip, Dub thread and wrap hook leaving a 1/8 in gap behind the cone, wrap the hackle, make a loop and add zonker hair minus the skin, spin the loop tool, wrap the loop in to the back of the head, wrap the tying thread around the loop thread 3 times and wrap around the hook, repeat, repeat, Add a drop of glue under the cone and whip, then pick out the dubbing in between the hackle.

Barred mag bunny strips for the claws. bunny fur in a loop for the body and silly leggs for the skirt. the hook is a mustad 30 degree jig hook 1/0 with 20 wraps of .25 lead

comming soon

Woolhead
large lead eyes
looped buny fur under body
tiger bared orange over tan magunm zonker
copper wire rib

kk

Magnum Zonker for the tail
Reg Zonker for the body and rabbit fur spun in a loop.
crazy legs for the skirt
bead
1/0 hook of choice

place bead and add 15 wraps of .25 lead or led sub wire. Then push it under the bead and add tie it all down. wrap thread to the bend and tie in a shank long piece of magnum zonker. Make a dubbing loop and add in 2.5 inchs of rabbit fur. wrap half the shanke with the looped fur. Tie in a zonker. leaving it hanging. take a piece of crazy legs and cut it in half. tie in the solid side of the legs and wrap it a s you tie it in. Now wrap the hanging zonker forward and tie it off. cut some fur off and make a thick dubbin collar behind the skirt. pass thread through the skirt to the bead. use a piece of wire to hold the skirt back and whip. remove wire.

icelandic sheep hair streamer hackles cross cut bunny and buck tail
hook is a modified stinger

w

Nymph skin + marker and sallys
Mr Peacock dubbin
turkey wing
mono eyes
lead wire
Daiichi 1870

q

A foxie bastard tied meat whistle style
the foxie bastard is a anglerschoice.com pattern
the meat whistle is a Barr’s pattern
this is a combo of the two

rf

1/0 stinger

s